10 Best 3D Printers Under $500 in 2019 – Cheap and Affordable

Are you looking for the best 3D printer but your budget is limited1? Don’t worry because here we have compiled a list of best cheap 3D printers available in the marketplace.

A long time ago, 3D printers were used by engineers and scientist which costs over $100,00. But with more improvement in technology and high demand, you can find a lot of low-cost 3D printers in the market. Due to increase in demand, many brands have started manufacturing high-quality 3D printers with different budget and requirements.

If you have just started in 3D printing and looking for a reliable DIY 3D printing machine, then you don’t need to spend thousands of dollars to buy a good one. Here, we have listed the top 10 best 3D printers under $500 that are great to start your 3D printing career and produce quality prints.

Before exploring into details, let’s take a look at the comparison chart top affordable 3D printers in 2019.

ImageNameRatingBuild Vol. (mm)
Monoprice 133820 Voxel 3D PrinterMonoprice Voxel 3D Printer4.1/5150 x 150 x 150 Buy Now
FlashForge Finder 3D PrinterFlashForge Finder 3D Printer4.1/5140 x 140 x 140 Buy Now
QIDI TECH X-one2 3D PrinterQIDI TECH X-one24.6/5145 x 145 x 145 Buy Now
Comgrow Creality Ender 3 ProComgrow Creality Ender 3 Pro4.3/5220 x 220 x 250 Buy Now
ADIMLab 3D PrinterADIMLab 3D Printer4.2/5310 x 310 x 410 Buy Now
TEVO Tornado 3D PrinterTEVO Tornado 3D Printer4.5/5300 x 300 x 400 Buy Now
TRONXY XY-3 3D PrinterTRONXY XY-3 3D Printer4.6/5310 x 310 x 330 Buy Now
Creality 3D Printer CR-10SCreality 3D Printer CR-10S4.1/5300 x 300 x 400 Buy Now
SainSmart x Creality Ender-3 PROSainSmart x Creality Ender-3 PRO4.1/5220 x 220 x 250 Buy Now
HICTOP Creality CR-10 3D PrinterHICTOP Creality CR-103.7/5300 x 300 x 400 Buy Now

Best 3D Printers Under $500 in 2019

For those looking for the best cheap 3D printers under $500, here are some of the poplular brands you should consider. All of these are from popular manufacturing brands and priced below $500. So, go through out the list and choose one that suits your budget and requirements.

1. Monoprice 133820 Voxel 3D Printer

Monoprice 133820 Voxel 3D Printer

  • Build area (mm) – 150 x 150 x 150
  • Printing Speed – 60mm/sec
  • Materials – ABS, PLA, PVA, HIPS, Flexible TPE/TPU, Metal, Wood
  • Layer Height – Down to 50 micron

Monoprice Voxel is a budget-friendly 3d printer which is best suitable for hobbyists with its unique and easy-to-use design. The printer comes with a fully-enclosed design that performs 3D printing with a simple menu system displayed on a 2.8″ color IPS touchscreen. The printer offers a build area of 150x150x150mm and a removable & flexible build plate which you can easily replace with a second build plate if it becomes damaged or swap.

This 3d printer features a quick change nozzle that allows you to change the nozzle in seconds without the help of any tool. This feature makes it great as compared to other 3d printers which require tools and 20-40 minutes of work to replace the nozzle. Its build plate can be heated up to 60-degree Celsius and has a printing speed up to 60mm/sec.

Additionally, the printer offers 8GB of internal memory, a USB port, Wi-Fi connectivity and a built-in camera for monitoring print operations. Best of all, the Voxel is the best fully assembled cheap 3D printer which delivers good value for the money.

ProsCons
  • Fully enclosed design to ensure the safety
  • Print a wide range of materials, not just PLA and ABS
  • Removable and flexible build plate
  • A built-in sensor to recognize low filament levels
  • 2.8″ color IPS touch screen
  • Build area could be more
  • Limited maximum build plate temperature

Check Price at Amazon


2. FlashForge Finder 3D Printer

FlashForge Finder 3D Printer

  • Build area (mm) – 140 x 140 x 140 mm
  • Filament Size – 1.75mm
  • Materials – PLA only.
  • Layer resolution – 100-400 microns, adjustable

FlashForge Finder is a wallet-friendly 3D printer which is packed with easy-to-use features and a great choice for kids and newbies. This printer comes with a slide-in build plate having a 140x140x140mm build area. It allows you to remove the finished 3D prints easily and clean the bed coupled with it by sliding. It has a cool touch screen having a 3.5-inch IPS display with intuitive icons for easy and smooth operation.

Apart from that, the printer is equipped with 8GB internal memory, Wi-Fi and USB connectivity. It is compatible with Mac OS and Windows operating system to give you quality 3D prints. The FlashForge Finder also supports 3D cloud function that let you edit, share, store and checking printing status online with a massive model database.

The printer uses only non-toxic PLA material for printing and the heated components are safely encased. With all these features, the FlashForge Finder is the best affordable 3D printer under $500 for novices and educators.

ProsCons
  • Home-friendly design
  • Easy to use
  • Safe and non-heated build plate
  • Produce very low sound during operation
  • Great tech support
  • Limited to only PLA filament
  • Single extruder

Check Price at Amazon


3. QIDI TECH X-one2 3D Printer

QIDI TECH X-one2 3D Printer

  • Build area (mm) – 145 x 145 x 145
  • Filament Size – 1.75 mm
  • Filament Type – ABS, PLA, TPU, Nylon, PETG
  • Build Plate Material – 6mm CNC machined aluminum alloy

QiDi Tech X-one2 is an affordable and high-quality 3D printer under $500 which comes with a fully assembled design. It is an excellent starter 3D printer for newbies who have never seen 3D printer in real life. The printer is equipped with a 3.5-inch touchscreen display interface that shows various parameters such as print bed temperature and printing progress etc.

The printer offers a high-quality aluminum heated print bed which is non-removable, so it can be difficult to remove completed prints. The heating platform of this printer supports both PLA as well as ABS filament. For connectivity, the printer is featured with a USB port and an SD card slot, however, you can’t connect using Wi-Fi, unlike FlashForge Finder.

The printer has a professional 3D printing motherboard which improves the stability of the machine and extending the life of the printer. You’ll get six months warranty or free repair or spare parts replacement.

ProsCons
  • Fully assembled and easy to setup
  • The heated aluminum print bed
  • Easy to level build platform
  • Responsive touchscreen interface
  • Compatible with third-party filaments
  • No Wi-Fi support
  • Limited build area
  • Not suitable for kids because of its heated print bed

Check Price at Amazon


4. Comgrow Creality Ender 3 Pro

Comgrow Creality Ender 3 Pro

  • Build area (mm) – 220 x 220 x 250
  • Filament Size – 1.75 mm
  • Filament Type – PLA
  • Max Traveling Speed – 180mm/s
  • Heated bed temperature – 110℃

Comgrow Creality Ender 3 Pro is a low-cost 3D printer which produces astonishing quality prints at such an affordable price. It is an excellent choice for hobbyists, makers and educated beginners. It offers many powerful features that you don’t find in more expensive 3D printers. The printer comes with a decent build volume of 220 x 220 x 250mm with a C-magnet build surface plate that ensures consistent temperature between build surface and provides all-around protection.

This printer comes with a UL Certified power supply which protects your 3D printer from an unexpected power outage. The print bed can heat up to 110 ℃ in just five minutes to meet the requirement of fast heating and longtime printing. It can resume printing from the end-record extruder position even after suffering unexpected power outages.

You’ll get 12 months warranty, lifetime technical support and 24 hours professional customer service. Overall, Comgrow Creality Ender 3 Pro is the best budget DIY 3D printer which delivers good printing quality and excellent performance for enthusiasts.

ProsCons
  • Highly affordable and easy to combine
  • The compact design having high-quality printing
  • Can be upgraded easily
  • Large print volume/bed
  • 1-year warranty for all components
  • Printing bed leveling is tricky
  • Additional adhesion materials are needed sometimes.

Check Price at Amazon


5. ADIMLab 3D Printer

ADIMLab 3D Printer

  • Build area (mm) – 310 x 310 x 410
  • Filament Size – 1.75 mm
  • Filament Type – PLA, ABS, PC, Wood, HIPS, TPE and Flexible PLA
  • Build Plate Material – Aluminum base heated bed

The ADIMLab 3D Printer is easy to use and an affordable 3D printer which comes with high-quality construction and easy setup. It is a partially assembled 3D printing machine which usually takes 10-20 minutes to set up. It comes with a large build area of 310x310x410mm which can accommodate larger designs. Due to this feature, it is an excellent choice for those who want to make large objects.

The temperature of its print bed ranges from 0 to 100°C whereas maximum extruder temperature is 260°C. The ADIMLab allows you to choose from a wide range of filaments like PLA, ABS, wood, HIPS, PC, TPE and flexible PLA. The printer is also featured with a motor silencer which allows you to bring this printer into the classroom and teach over the noise.

It comes with a 1-year warranty for each part of the 3D printer. Overall, this 3D printer is good for newbies who want to learn and grow with a printer.

ProsCons
  • Great value for the price
  • Easy setup
  • Large build area
  • Great customer service
  • Support multiple filaments
  • You may deal with temperature control issues

Check Price at Amazon


6. TEVO Tornado 3D Printer

TEVO Tornado 3D Printer

  • Build area (mm) – 300 x 300 x 400
  • Filament Size – 1.75 mm
  • Filament Type – PLA, ABS, PETG, Wood, PVA, Carbon Fiber, flex filament, etc
  • Max Print Speed – 150mm/s

The Tevo Tornado is a large volume 3D printer which looks to be an exact clone of the Creality CR10 but comes with cheaper price. It has a large 300X300X400 mm build size which delivers high accuracy printing quality. This printer comes 95-percent pre-assembled which make it easy to install. It is featured with TEVO Titan Extruder which brings lightness to prints and also improves the printer’s performance.

The printer comes with a 0.4mm diameter nozzle and provides a maximum print speed of 150mm/sec. It is also featured with an LCD controller screen which allows you to view and select files easily and make your printing process smooth. It supports most of the filament types like PLA, Nylon, Carbon fiber, ABS, wood, HIPS, and more.

The printer has a fast heating silicon bed with an insulation layer that helps in heating up bed faster. It offers high accuracy printing quality up to 50 microns making it ideal for standard 3D printing designs. All-in-all, Tornado is the best 3D printer for beginners in terms of looks, build quality, stability, and performance.

ProsCons
  • High accuracy printing quality
  • Large printing size
  • Easy to set up and begin printing
  • Fast heating Silicon heat bed
  • Firmware boot up bug becomes a bit tiresome
  • “Salmon skin” pattern takes the shine away from large prints

Check Price at Amazon


7. TRONXY XY-3 3D Printer

TRONXY XY-3 3D Printer

  • Build area (mm) – 310 x 310 x 330
  • Filament Size – 1.75 mm
  • Filament Type – PLA, ABS, HIPS, Wood, PC, PVA, etc
  • Max Print Speed – 2-100mm/s

TRONXY XY-3 is a powerful yet low-cost 3D printer for beginners and hobbyists to start with. This budget 3D printer is designed to provide quality prints and impressive performance. It comes with a large print size of 310x310x300mm which lets you create large printing models with ease. It consists of a 3.5-inch full-color touch screen to help you control the printer settings and adjust according to your desire.

The printer supports multiple types of filaments including PLA, ABS HIPS, Poly Carbonate, wood, and PVA, etc. It comes with a semi-assembled aluminum steel frame which leads to easy to install process. The Tronxy features a metal frame structure which increases the stability during the printing process.

It also has flex magnetic stickers which allow you to remove your prints easily from the hotbed. The printer offers printing speed of 2mm to 100mm per second and has a nozzle temperature of 260-degrees. With better heat dissipation, stable performance and longer machine life, the TRONXY XY-3 is worth every penny.

ProsCons
  • 3.5 inches LCD touch screen
  • Large print size
  • Flex magnetic stickers
  • Support various types of filaments
  • No storage or SD card
  • Software is limited to fewer settings

Check Price at Amazon


8. Creality 3D Printer CR-10S

Creality 3D Printer CR-10S

  • Build area (mm) – 300 x 300 x 400
  • Filament Size – 1.75 mm
  • Filament Type – PLA, TPU, Wood, Carbon fiber
  • Max Print Speed – 200mm/s

Creality CR-10S is an exceptionally functional and affordable 3D printer which is great to fulfill all your large model 3d printing needs. It’s an upgrade of Creality CR-10 and comes with a large build area of 300x300x400mm which is an extraordinary feature for a 3D printer in the sub-500 price range. It has a cool feature of print resume which allows the printer to resume printing from where it stopped due to the power outage.

It features a simple and reliable design with a heated bed and a glass print surface, which make it ideal for working with PLS filaments. It offers an easy-to-install process, you just need to install the Z-plane kit on the XY plane that will take about 20 minutes.

The other great feature of this 3D printer is its filament monitoring alarm protection system that sends an alert if the filament runs out and brings the printing to a halt. However, PLA is the recommended filament for CR-10S but it also supports a wide range of materials such as ABS, TPU, PETG, PC, wood, and copper, etc.

ProsCons
  • Standard build volume for large prints
  • Easy to assemble
  • Removable glass print bed
  • 30-days money back guarantee
  • Extruder placement is not good
  • The bed takes a long time to heat up

Check Price at Amazon


9. SainSmart x Creality Ender-3 PRO

SainSmart x Creality Ender-3 PRO

  • Build area (mm) – 220 x 220 x 250
  • Filament Size – 1.75 mm
  • Filament Type – PLA, TPU, ABS, PETG
  • Max Print Speed – 180mm/s

Ender-3 PRO is an upgraded version of Ender-3 and offers many outstanding features for such a budget price. The printer boasts a removable and flexible magnetic printing bed which allow you to pluck your prints from the build plate easily. With the large build area of 220x220x250mm, this 3D printer allows you to create large and complex models.

This printer provides resume printing system which allows the printer to resume from where it stopped due to the electric power outage. It offers a fast heating hotbed that reaches its operating temperature in 5 minutes or less. The printer has a 40×40 aluminum extrusion for Y-axis base which provides stability and improves print quality.

The combination of an extruder and heated print bed aids in handling various filament types like PLA, ABS, TPU, and PETG. The printer features a “C-magnet” magnetic sticker which is completely removable, flexible and can better adhere to build platform.

ProsCons
  • Easy to setup
  • Offer large build volume as compared to entry-level printers
  • 1-year manufacturer’s warranty
  • High precise positioning of the print head due to CNC-machined Y-axis mounting slot
  • Additional adhesion may require sometimes.
  • Magnetic bed may not like by everyone

Check Price at Amazon


10. HICTOP Creality CR-10 3D Printer

HICTOP Creality CR-10 3D Printer

  • Build area (mm) – 300 x 300 x 400
  • Filament Size – 1.75 mm
  • Filament Type – PLA
  • Max Print Speed – 200mm/s

HICTOP Creality CR-10 is a fully assembled budget 3D printer which comes with an extra large build space. This cheap printer is equipped with fast heating aluminum hotbed and a glass board which is held in place by four clips. It has a control box that contains the power supply, the LCD screen, and the motherboard which are safe, good looking and easy to use.

This 3D printer has a single extruder and its nozzle temperature reaches up to 250°C. The printer comes with three parts that you need to put together when assembling and it takes just about 10 minutes to build. The printer provides high accuracy bearings and quality parts which make the printer more stable and quiet while printing.

Their customer support is excellent, they’re always ready to help you with any troubleshooting issue. Overall, HICTOP Creality CR-10 is a good 3D printer which offers large build size and excellent performance under $500 price range.

ProsCons
  • Easy to assemble
  • Large printing size
  • Solid construction made of aluminum alloy
  • Excellent customer support
  • The print bed takes a long time to heat up
  • Can’t support all kind of filaments

Check Price at Amazon


Final Words

These are the best 3D printers under 500 dollars price range. All of them are great for the hobbyist as well as 3D printing beginners. If you have any queries or suggestions, let us know in the comment section below.

Also read:

Leave a Comment

shares